Digital Compression machine 3000KN

The Digital Compression Machine 3000KN Price in Nigeria is a major purchasing consideration for construction companies, concrete-testing laboratories, civil engineering consultants, universities and quality-control departments. This heavy-duty hydraulic testing machine measures the compressive strength of concrete cubes, cylinders, blocks, bricks and other suitable construction materials. With a maximum loading capacity of 3000 kilonewtons (300 tonnes-force), it is designed for high-capacity laboratory testing. Nigerian advertisements currently show prices from approximately ₦5.4 million to ₦14.5 million, depending on the brand, automation, accuracy, accessories and supplier. Jiji Nigeria +3

Digital Compression Machine 3000KN Price in Nigeria

The Digital Compression Machine 3000KN Price in Nigeria depends on the machine’s manufacturer, hydraulic system, digital control unit, load accuracy, automation level, platen dimensions and accessories. This machine is widely used in concrete-testing laboratories, road construction companies, civil engineering departments, building-material manufacturers and geotechnical research facilities.

A Digital Compression Machine 3000KN, also called a 3000KN Concrete Compression Testing Machine (CTM), applies a controlled compressive force to a test specimen until failure. It measures the maximum load sustained by the specimen and helps determine its compressive strength. The equipment is particularly useful for testing concrete cubes, concrete cylinders, paving blocks, bricks and other compatible construction materials.

If you are searching for the Digital Compression Machine 3000KN Price in Nigeria, this guide covers the features, technical specifications, price estimates, manual PDF download, installation procedure, reviews, frequently asked questions and where to buy the equipment in Nigeria.

Features and Specifications of Digital Compression Machine 3000KN

The Digital Compression Machine 3000KN is a heavy-duty hydraulic laboratory instrument designed for high-capacity compression testing. It combines a rigid loading frame, hydraulic power system, compression platens, load measurement sensors and a digital control unit.

Main Features

1. 3000KN maximum capacity: Designed to apply a maximum compressive force of 3000 kilonewtons, equivalent to approximately 300 tonnes-force.
2. Digital load display: Displays the applied load and maximum load reached during testing.
3. Hydraulic loading system: Uses hydraulic pressure to apply compressive force to the specimen.
4. High-accuracy measurement: Selected models offer Class 1 accuracy or approximately ±1% force indication error.
5. Heavy-duty frame: Provides structural stability during high-load testing.
6. Automatic load control: Advanced versions can control the loading rate automatically.
7. Peak-load memory: Selected digital controllers retain the maximum load reached during a test.
8. Compression platens: Hardened platens apply compressive force to the specimen.
9. Adjustable testing space: Some machines have manual or motorised adjustment systems.
10. Microprinter: Selected models include a printer for recording test results.
11. Overload protection: Some configurations include protection against excessive loading.
12. Emergency stop: Available on selected automatic and computer-controlled systems.
13. Data acquisition: Advanced versions can connect to a computer for test recording and reporting.
14. Multiple specimen applications: Suitable configurations can test concrete cubes, cylinders, blocks and other construction materials.

Technical Specifications

The following are representative specifications for 3000KN machines. Actual values differ by manufacturer and model.

Specification Typical details
Equipment name Digital Compression Testing Machine
Model example DYE-3000
Maximum load 3000KN
Equivalent capacity Approximately 300 tonnes-force
Loading system Electro-hydraulic
Accuracy Class 1 or approximately ±1%, model-dependent
Display Digital electronic display
Load measurement Electronic load sensor or hydraulic pressure measurement
Piston stroke Commonly 50–100mm, depending on model
Platen dimensions Approximately 260 × 250mm or larger, model-dependent
Testing space Model-dependent
Power supply Commonly 380V three-phase on DYE-3000 models
Motor power Approximately 0.75–1.1kW on some configurations
Accessories Compression platens, spacers and control unit
Application Concrete, bricks, blocks and construction materials
Standards ASTM C39, EN 12390-3 and other applicable standards

Example: DYE-3000 Digital Compression Machine

A typical DYE-3000 machine has the following published specifications:

* Maximum load capacity: 3000KN.
* Loading accuracy: approximately ±1%.
* Pressure test range: model-dependent, with some versions specified from 10% to 100% of full scale.
* Piston stroke: approximately 50mm.
* Compression platen: approximately 260 × 250mm on one published configuration.
* Maximum compression space: approximately 320mm.
* Power supply: 380V AC, 50Hz on the cited configuration.
* Built-in microprinter on selected versions.
* Approximate machine weight: 1,200kg on one published model.

Important: Some 3000KN machines have different platen dimensions, piston stroke, machine weight, power requirements and testing-space dimensions. Always request the exact manufacturer’s datasheet before ordering.

Digital Compression Machine 3000KN Price in Nigeria

The Digital Compression Machine 3000KN Price in Nigeria varies according to the manufacturer, machine configuration, hydraulic system, digital display, automation, accuracy, accessories, installation and shipping costs.

Estimated Price Guide

Machine type Indicative price in Nigeria
Basic 3000KN digital compression machine ₦5,400,000–₦7,500,000
Standard digital 3000KN CTM ₦7,000,000–₦9,500,000
Semi-automatic 3000KN machine ₦8,000,000–₦11,000,000
Fully automatic 3000KN CTM ₦9,000,000–₦14,500,000
Computer-controlled 3000KN machine ₦10,000,000–₦16,000,000
Premium laboratory configuration ₦14,000,000–₦18,000,000+

These are indicative Nigerian market estimates, not guaranteed quotations.

Recent Nigerian Advertised Price Examples

Some online listings have advertised:

* ₦5,400,000 for a 3000KN fully automated compression machine.
* ₦5,500,000 for a digital 3000KN compression testing machine.
* ₦9,000,000 for a digital 3000KN compression machine.
* ₦10,800,000 for a fully automated 3000KN machine.
* ₦13,000,000 for a 3000KN compression testing machine.
* ₦14,500,000 for a 3000KN concrete pressure compression machine.

The prices above come from different sellers and configurations. They should not be treated as equivalent machines or confirmed current quotations.

Factors Affecting the Price

1. Brand and manufacturer: Internationally recognised brands may cost more because of manufacturing quality, support and documentation.

2. Hydraulic system: The quality and configuration of the hydraulic pump, cylinder and control valves affect the machine’s performance and price.

3. Digital controller: Basic digital displays and advanced computer-controlled systems have different costs.

4. Load accuracy: Machines supplied with recognised calibration documentation and higher accuracy classifications may cost more.

5. Automation: Fully automatic machines with automatic loading-rate control and data acquisition are generally more expensive.

6. Accessories: Compression platens, specimen spacers, safety guards, printers and computer software may affect the final price.

7. Installation and calibration: Transportation, commissioning, calibration and technician support can add to the purchase cost.

Where to Buy Digital Compression Machine 3000KN in Nigeria

For current price enquiries, specifications, availability and delivery arrangements, contact:

IFYTEX INDUSTRIAL EQUIPMENT

Address: F96Up, Alaba International Market, Lagos, Nigeria.

WhatsApp: 09034980831

Call: 09034980831

Contact IFYTEX INDUSTRIAL EQUIPMENT to ask about the available 3000KN digital compression machine, manufacturer, model number, calibration documentation, warranty, accessories and installation support.

The business describes itself as a sole importer and best seller of original laboratory equipment in Nigeria. Buyers should independently verify manufacturer details, authenticity, importation documents and warranty terms before payment.

Digital Compression Machine 3000KN Manual PDF Download

The operating manual is important because it explains how to install, operate, calibrate and maintain the machine safely.

The manual should cover:

* Machine components and identification.
* Electrical connections.
* Hydraulic oil requirements.
* Hydraulic pump operation.
* Digital controller settings.
* Specimen preparation.
* Compression testing procedure.
* Loading-rate adjustment.
* Load measurement and data recording.
* Calibration and verification.
* Hydraulic maintenance.
* Troubleshooting and safety procedures.

DYE-3000 Manual PDF

You can consult the following model-specific manual:

DYE-3000 Digital Compression Testing Machine Manual PDF:

https://image.chukouplus.com/themes/simplebootx/Upload/W_335/download/20200810/5f30b1fb8a576.pdf

This document is identified as a DYE-3000 Digital Compression Testing Machine manual from Xianxian Rushi Technology Co., Ltd.

Additional manufacturer technical references:

* DYE-3000 specifications: https://www.rushitest.com/product-compression-testing-machine-3000-kn.html
* Testing.de 3000KN compression machine: https://www.testing.de/en/22.1101.01-FU-i20
* Matest 3000KN compression machine catalogue: https://www.matest.com.tr/upload-files/Files-15.11.202226c5d82793a24252b664672bb7eac4cd.pdf

Important: The DYE-3000 manual should only be used for a compatible DYE-3000 configuration. Different manufacturers may use different controllers, hydraulic systems, electrical connections and operating procedures. Always request the manual matching your machine’s exact model and serial number.

How to Install Digital Compression Machine 3000KN

Installing a Digital Compression Machine 3000KN requires proper lifting equipment, a suitable foundation, correct electrical connections and hydraulic-system preparation. Because some 3000KN machines weigh over one tonne, installation should be carried out by qualified technicians.

Installation Procedure

1. Prepare the installation area: Select a firm, level laboratory floor capable of supporting the machine’s weight and operating loads.
2. Prepare the foundation: Follow the manufacturer’s foundation drawing and anchoring requirements. Do not assume a standard concrete thickness is suitable for every model.
3. Unload the machine safely: Use a suitable forklift or crane with the correct lifting capacity and approved lifting points.
4. Position the machine: Place the compression testing frame in its designated location.
5. Level the machine: Use a precision spirit level or machinist’s level to check the frame and lower platen.
6. Secure the equipment: Install anchor bolts or other mounting arrangements where specified by the manufacturer.
7. Inspect the hydraulic system: Check the hydraulic pump, cylinder, hoses, valves and fittings for transport damage.
8. Fill the hydraulic reservoir: Use only the hydraulic oil grade specified in the operating manual. Do not assume ISO VG 46 or another oil grade is suitable without confirmation.
9. Connect the control unit: Install the digital display, sensor cables, pump connections and control wiring according to the manufacturer’s diagram.
10. Connect the electrical supply: Verify the required voltage, frequency, phase and earthing arrangements against the machine’s rating plate. Many DYE-3000 models require three-phase 380V.
11. Check the hydraulic oil level: Ensure that the oil is at the specified level before starting the pump.
12. Start the hydraulic pump: Follow the manufacturer’s initial start-up and air-bleeding instructions.
13. Check the loading system: Inspect the piston movement, valves, pressure response and emergency stop where fitted.
14. Verify the digital display: Check the load sensor and controller readings using the manufacturer’s verification procedure.
15. Calibrate the machine: Arrange calibration by a competent laboratory or authorised service provider using suitable reference standards.
16. Perform a preliminary test: Use an appropriate test specimen and follow the specified loading procedure.
17. Train operators: Ensure that laboratory technicians understand specimen positioning, loading rate, emergency procedures and data recording.

Important Installation Safety

* Never lift the machine using unapproved lifting points.
* Do not operate the machine on an unstable foundation.
* Do not exceed the rated 3000KN capacity.
* Never place hands between the compression platens during operation.
* Keep the safety guard in place where supplied.
* Ensure correct electrical earthing and phase connections.
* Do not open hydraulic lines while the system is pressurised.
* Follow the exact manufacturer’s installation manual.

Digital Compression Machine 3000KN Review in Nigeria

The Digital Compression Machine 3000KN is suitable for high-capacity concrete and construction-material testing laboratories in Nigeria.
Its 3000KN loading capacity makes it useful for testing concrete cubes, cylinders, bricks and compatible building materials.
The digital display helps operators monitor test loads and identify the maximum force reached during testing.
Buyers should verify calibration, hydraulic performance, power requirements, warranty and technical support before purchasing.
It is a valuable investment for professional civil engineering laboratories and construction quality-control departments.

16 Frequently Asked Questions About Digital Compression Machine 3000KN Price in Nigeria

These questions are based on common Nigerian search intents about 3000KN compression machines, concrete testing and laboratory equipment. They are SEO-focused questions and answers, not a verified live transcript of Google’s Nigeria “People also ask” panel.

1. What is the price of a Digital Compression Machine 3000KN in Nigeria?

The advertised Nigerian prices range from approximately ₦5,400,000 to ₦14,500,000 across different listings. Advanced computer-controlled machines may cost ₦16,000,000–₦18,000,000 or more, depending on the manufacturer and configuration.

2. What is a 3000KN compression testing machine used for?

It is used to determine the compressive strength of concrete, bricks, blocks, stones and other compatible construction materials. It applies a controlled compressive load until the specimen fails.

3. What does 3000KN mean in a compression testing machine?

3000KN means the machine has a maximum rated loading capacity of 3,000 kilonewtons. This is approximately equivalent to 300 tonnes-force.

4. What is the difference between a digital and manual compression testing machine?

A digital compression machine uses electronic sensors and a digital display to measure and show test loads. A manual machine generally relies more on mechanical controls and analogue measurement systems. Digital machines may also offer automatic data recording and peak-load display.

5. Can a 3000KN machine test concrete cubes?

Yes. A suitably configured 3000KN compression testing machine can test concrete cubes, including 100mm, 150mm and some larger specimens, depending on the platen size and available testing space.

6. Can a 3000KN compression machine test concrete cylinders?

Yes. Compatible models can test concrete cylinders. Confirm the maximum cylinder diameter, height, platen dimensions and any required accessories before testing.

7. What is the ASTM standard for concrete compression testing?

ASTM C39/C39M is a widely used standard for determining the compressive strength of cylindrical concrete specimens. Concrete cube testing may follow other applicable standards, such as EN 12390-3.

8. What is the difference between 2000KN and 3000KN compression machines?

A 2000KN machine has a maximum rated capacity of 2000 kilonewtons, while a 3000KN model has a maximum capacity of 3000 kilonewtons. The appropriate choice depends on specimen size, expected failure load and testing requirements.

9. What is the accuracy of a digital compression testing machine?

Accuracy depends on the model and calibration. Some 3000KN machines specify Class 1 accuracy or a relative force-indication error of approximately ±1%. Always check the calibration certificate and the applicable accuracy standard.

10. Does a 3000KN compression machine require three-phase electricity?

Many DYE-3000 models require a 380V three-phase power supply. However, electrical requirements vary by manufacturer and configuration. Check the machine’s rating plate before connecting it.

11. What hydraulic oil is used in a compression testing machine?

The correct hydraulic oil depends on the manufacturer’s pump and operating specifications. Some machines use anti-wear hydraulic oil, but the exact viscosity grade must be confirmed from the operating manual.

12. How do you calculate concrete compressive strength?

Compressive strength is calculated by dividing the maximum load at failure by the loaded cross-sectional area of the specimen.

Formula:

Compressive strength = Maximum load ÷ Loaded area

When load is in newtons and area is in square millimetres, the result is N/mm², equivalent to MPa.

13. How often should a compression testing machine be calibrated?

Calibration frequency should follow the applicable testing standard, laboratory quality-management system and manufacturer’s recommendations. Calibration should also be considered after repairs, relocation or suspected measurement problems.

14. How much does a 3000KN compression machine weigh?

Weight varies by manufacturer and frame design. Some DYE-3000 models are listed around 1,050–1,200kg, while heavier configurations may weigh more. Confirm the shipping and net weights before arranging transportation.

15. Where can I buy a Digital Compression Machine 3000KN in Lagos?

You can contact IFYTEX INDUSTRIAL EQUIPMENT at F96Up, Alaba International Market, Lagos, Nigeria. Call or WhatsApp 09034980831 for current price enquiries, availability and product specifications.

16. What should I check before buying a 3000KN compression testing machine?

Check the manufacturer, model number, maximum capacity, accuracy class, platen dimensions, hydraulic system, power requirements, digital controller, calibration certificate, warranty, operating manual, installation support and spare-parts availability.

20 Related Products of the Same Category

Concrete compression testing machine, 2000KN digital compression machine, 1000KN compression testing machine, 3000KN automatic compression machine, 3000KN computer-controlled CTM, cement compression testing machine, concrete cube testing machine, concrete cylinder compression machine, brick compression testing machine, block compression testing machine, hydraulic compression testing machine, universal testing machine, flexural testing machine, concrete tensile testing machine, concrete core compression machine, concrete rebound hammer, concrete cube mould, concrete curing tank, concrete slump test apparatus, digital load testing machine.

SEO Optimized Conclusion

The Digital Compression Machine 3000KN Price in Nigeria varies according to the manufacturer, hydraulic system, digital control technology, automation, accuracy and accessories supplied. Nigerian market advertisements show prices ranging from approximately ₦5.4 million to ₦14.5 million for different configurations, while advanced computer-controlled models can cost more. If you operate a concrete-testing laboratory, construction company or civil engineering facility, choose a machine that meets your testing requirements and comes with the correct operating manual, calibration documentation and technical support. For current prices, original equipment enquiries, specifications and delivery arrangements, contact IFYTEX INDUSTRIAL EQUIPMENT, F96Up, Alaba International Market, Lagos, Nigeria, on 09034980831 by call or WhatsApp.

30 SEO Tags

Digital compression machine, 3000KN compression machine, Compression machine Nigeria, 3000KN machine price, Concrete compression machine, Digital CTM Nigeria, Concrete testing machine, Compression testing machine, CTM price Nigeria, Concrete strength tester, Hydraulic compression machine, Digital concrete tester, 3000KN CTM Nigeria, Laboratory testing equipment, Civil engineering equipment, IFYTEX compression machine, IFYTEX digital CTM, IFYTEX 3000KN machine, IFYTEX concrete tester, IFYTEX laboratory equipment, Concrete cube testing, Concrete cylinder testing, Automatic compression machine, Computer controlled CTM, ASTM C39 machine, EN 12390 testing, Concrete laboratory machine, Building material testing, Hydraulic CTM Nigeria, Compression tester Lagos.

Five Related Brand Tags

DYE-3000 compression machine, Matest compression machine, Rushi compression machine, TESTING CTM, ENTEK compression machine.

Full SEO Meta Description

Digital Compression Machine 3000KN Price in Nigeria: discover price estimates, features, specifications, manual PDF download, installation guide and concrete-testing applications. Contact IFYTEX INDUSTRIAL EQUIPMENT, a business promoting itself as a best seller and supplier of original laboratory equipment, at F96Up, Alaba International Market, Lagos, Nigeria. Call or WhatsApp 09034980831 for current price and availability.

Suggested SEO Title

Digital Compression Machine 3000KN Price in Nigeria (2026) – Features, Manual & Supplier

Suggested URL Slug

digital-compression-machine-3000kn-price-in-nigeria

Sources and technical references

Nigerian price references

* Jiji – 3000KN Fully Automated Compression Machine, ₦5.4 million⁠.
* Jiji – Digital Compression Testing Machine 3000KN, ₦5.5 million⁠.
* Nature Solar – Digital Compression Machine 3000KN, advertised at ₦9 million⁠.
* Jiji – 3000KN Fully Automated Machine, ₦10.8 million⁠.
* Jiji – 3000KN Compression Testing Machine, ₦13 million⁠.
* Ong.ng – 3000KN Concrete Compression Machine, ₦14.5 million⁠.

Manufacturer specifications and manuals

* Rushi – DYE-3000 Compression Testing Machine Specifications⁠.
* DYE-3000 Digital Compression Testing Machine Manual PDF⁠.
* TESTING.de – 3000KN Compression Testing Machine⁠.
* Matest – 3000KN Compression Machine Catalogue⁠.
* Advanzo – Fully Automatic Compression Tester⁠.

Supplier claim note: The sole-importer, original-product seller and best-seller descriptions are claims supplied by IFYTEX INDUSTRIAL EQUIPMENT and have not been independently verified. The prices above are third-party advertised references and are not confirmed quotations from IFYTEX.