B75T oil burner 3kw 380V 2800r/min

B75T Oil Burner 3kW 380V 2800r/min Price in Nigeria

The B75T Oil Burner 3kW 380V 2800r/min Price in Nigeria is a relevant search for factories, boiler operators, industrial heating companies, food-processing plants and businesses that need a powerful oil-fired combustion system. The B75T is listed by its manufacturer, Bairan, as part of its industrial oil-burner range. However, buyers should confirm the exact model variant and nameplate: some B75T listings describe a 1.5kW motor, while the product title being searched here specifies 3kW, 380V and 2,800r/min. These ratings should not be assumed interchangeable. bairanburner.com +1

B75T Oil Burner 3kW 380V 2800r/min Price in Nigeria

The B75T Oil Burner 3kW 380V 2800r/min Price in Nigeria is an important search for industrial boiler operators, manufacturing companies, textile factories, food-processing plants, drying facilities and businesses that require dependable industrial heating. The B75T is an industrial oil burner designed to produce a controlled flame by mixing fuel and combustion air. It is used in compatible boilers, furnaces and industrial heating equipment.

The Bairan manufacturer lists the B75T among its light-oil burner products. However, B75T versions and online listings may have different motor ratings and configurations. Buyers searching for the 3kW, 380V, 2,800r/min version should verify the exact nameplate, electrical requirements, fuel compatibility and heat-output rating before ordering.

Features & Specifications of B75T Oil Burner 3kW 380V 2800r/min

The B75T industrial oil burner is designed to deliver controlled combustion for industrial heating applications. It combines a combustion fan, fuel delivery components, ignition system and flame-control equipment.

The following table describes the specifications in the product title and typical features of this category. Confirm all technical details against the exact unit’s manufacturer’s datasheet.

Specification Details
Product name B75T industrial oil burner
Burner category Industrial oil burner
Motor power in requested version 3kW (confirm nameplate)
Electrical supply in requested version 380V (confirm phase and frequency)
Motor speed in requested version 2,800r/min
Fuel Depends on the burner configuration; confirm approved oil type
Combustion system Forced-draught combustion
Ignition Automatic ignition system on applicable versions
Air supply Combustion fan
Fuel delivery Fuel pump and nozzle assembly, depending on model
Flame monitoring Flame detector or photocell on applicable versions
Control Burner control unit
Applications Boilers, furnaces and industrial heating systems

Important specification warning: A Nigerian B75T listing describes a Bairan model with a 1.5kW motor, 380V supply and 2,800r/min speed, while your requested product title specifies 3kW. Do not assume these are the same configuration. Confirm whether the 3kW rating refers to the fan motor, total electrical input or another component. Also request the rated heat output in kW and approved fuel specification.

Major Features and Benefits

1. Industrial combustion performance: The burner is designed to mix fuel and air to produce a controlled flame for heating applications.

2. Combustion fan: The fan supplies combustion air to support the burning process. Correct airflow adjustment is important for stable combustion.

3. Fuel delivery system: Depending on the model, a pump, filter, fuel lines and nozzle deliver and atomise the oil.

4. Automatic ignition: Applicable versions use an ignition transformer and electrodes to ignite the fuel-air mixture during the start-up sequence.

5. Flame detection: A flame detector or photocell monitors flame presence. The safety control should shut down fuel delivery if a flame failure occurs.

6. Burner control system: The control unit manages the start-up sequence, ignition and safety interlocks according to the burner design.

7. Industrial heating applications: The B75T category is used in suitable boilers, furnaces, drying systems and other industrial heating equipment.

8. Serviceable components: Parts such as filters, nozzles, electrodes, fuel pumps and control units may be replaced during scheduled maintenance using the correct model-specific parts.

9. Manufacturer product range: Bairan lists B75T alongside other industrial oil-burner models, including B55T, B100T, B120T and larger burners.

B75T Oil Burner 3kW 380V 2800r/min Price in Nigeria

The B75T Oil Burner 3kW 380V 2800r/min Price in Nigeria varies according to the exact burner configuration, motor rating, heat output, fuel type, control system, country of manufacture, accessories, warranty and importation costs.

Online Nigerian listings show different B75T prices:

* A Nigerian listing advertises an original B75T oil burner at approximately ₦16,800,000.
* Another Bairan B75T industrial oil-burner listing advertises a price of approximately ₦6,800,000, but describes a different configuration with a 1.5kW motor.

These are advertised marketplace prices, not confirmed quotations for the exact 3kW, 380V, 2,800r/min version. The difference makes it especially important to verify the model and specifications before comparing prices.

For the current price and availability of the requested B75T oil burner, contact IFYTEX INDUSTRIAL EQUIPMENT directly.

Where to Buy B75T Oil Burner in Nigeria

Supplier: IFYTEX INDUSTRIAL EQUIPMENT
Address: F96Up, Alaba International Market, Ojo, Lagos, Nigeria.
Location details: F96, Upstairs, F-Line, Alaba International Market, Ojo, Lagos.
WhatsApp: 09034980831
Call: 09034980831

IFYTEX INDUSTRIAL EQUIPMENT promotes itself as a leading seller and importer of industrial equipment and oil burners in Nigeria. The business describes itself as a source of original B75T oil burners. Buyers should request the manufacturer’s nameplate, serial number, warranty and authenticity documentation to verify the product before purchase.

Before making payment, confirm:

* The exact B75T model and manufacturer.
* Whether the motor is rated at 3kW.
* Whether the supply is 380V three-phase or another configuration.
* Whether the motor speed is 2,800r/min.
* The burner heat-output range in kW.
* The approved fuel type.
* Whether the fuel pump, nozzle, controller and ignition system are included.
* The warranty and availability of replacement parts.
* Whether installation and commissioning are included.

B75T Oil Burner 3kW 380V 2800r/min Manual PDF Download

The manufacturer’s operating manual is important for correct installation, electrical connection, fuel adjustment, ignition, combustion tuning, maintenance and troubleshooting.

Bairan’s official product catalogue lists the B75T in its light-oil burner range:

Bairan Official Oil Burner Product Catalogue:
https://bairanburner.com/pro.asp

The catalogue also lists related models and spare parts, including oil pumps, controllers, transformers, motors, fans, solenoid valves, electrodes, flame detectors, photocells and nozzles.

A model-specific B75T operating manual PDF was not independently verified here. Contact the supplier or manufacturer and request the correct manual for the exact model and serial number. Do not use a manual for another B75T variant as the authority for wiring, fuel pressure, nozzle selection or combustion settings.

How to Install B75T Oil Burner 3kW 380V 2800r/min

Installation and commissioning must be carried out by a qualified industrial burner technician and electrician. Incorrect fuel connections, electrical wiring or combustion adjustment can cause fire, explosion, carbon monoxide exposure or equipment damage.

Step 1: Check the boiler or furnace compatibility. Confirm that the boiler or furnace is designed for the B75T burner’s heat output, flame dimensions and mounting arrangement.

Step 2: Verify the burner nameplate. Check the model, motor power, voltage, phase, frequency, speed and fuel specification. Ensure that the unit matches the electrical supply available at the installation site.

Step 3: Prepare the installation area. Provide a stable mounting surface, adequate ventilation, safe access for servicing and suitable clearance around the burner.

Step 4: Mount the burner. Use the manufacturer’s mounting flange, gasket and approved fixing arrangement. Ensure that the burner is correctly aligned with the combustion chamber.

Step 5: Connect the fuel supply. A qualified technician should install the approved fuel tank, shut-off valves, filters, fuel lines and pump connections according to the manufacturer’s diagram.

Step 6: Complete the electrical connections. A qualified electrician should connect the motor, controller, ignition transformer, flame detector and safety interlocks according to the model-specific wiring diagram.

Step 7: Inspect the combustion system. Check the fan, air intake, nozzle, electrodes, fuel filter, pump and safety components for correct installation and condition.

Step 8: Check the boiler safety controls. Confirm that the boiler’s pressure, temperature, water-level and emergency shutdown controls are working correctly.

Step 9: Commission the burner. The qualified technician should perform the first start-up, check flame stability and use suitable combustion-analysis equipment to adjust the air-fuel mixture to the manufacturer’s specified limits.

Step 10: Test the safety shutdown. Verify the flame-failure protection and other safety interlocks using the approved commissioning procedure.

Step 11: Record the commissioning results. Document the burner settings, fuel type, operating conditions, test results and maintenance requirements.

Never bypass the flame detector, pressure switches, boiler safety controls or other protective devices. Do not attempt to adjust fuel pressure or ignition components without the correct training and manufacturer’s instructions.

B75T Oil Burner 3kW 380V 2800r/min Review in Nigeria

The B75T industrial oil burner is designed for compatible boilers, furnaces and industrial heating systems.
The requested 3kW, 380V and 2,800r/min ratings should be confirmed against the exact unit’s nameplate.
Its combustion fan, fuel delivery and ignition components support controlled industrial heating when correctly configured.
Professional installation and combustion testing are essential for safe and dependable operation.
For current availability and pricing in Nigeria, contact IFYTEX INDUSTRIAL EQUIPMENT at Alaba International Market, Lagos, on 09034980831.

16 Frequently Asked Questions About B75T Oil Burner 3kW 380V 2800r/min

These questions address common buyer searches about industrial oil burners, B75T specifications, installation, operation and maintenance. Google’s live People Also Ask results can change by location and search session, so these are search-intent-based FAQs rather than a claim of verbatim extraction.

1. How much is a B75T oil burner 3kW 380V 2800r/min in Nigeria?

Online Nigerian listings show different B75T prices, including approximately ₦6.8 million and ₦16.8 million for differently described configurations. Contact IFYTEX INDUSTRIAL EQUIPMENT on 09034980831 for the current price of the exact 3kW version.

2. What is a B75T oil burner used for?

A B75T industrial oil burner is used to generate a controlled flame for compatible boilers, furnaces and industrial heating equipment.

3. What does 3kW mean on an oil burner?

3kW describes a power rating, but the nameplate or datasheet must clarify whether it refers to the motor rating or another electrical component. It should not be confused with the burner’s thermal heat output.

4. What does 380V mean on a B75T oil burner?

380V is the stated electrical supply voltage. Confirm the required phase, frequency, current and wiring arrangement before connecting the burner.

5. What does 2800r/min mean?

It means the motor or rotating component is rated at 2,800 revolutions per minute. Confirm which component the rating applies to using the manufacturer’s documentation.

6. What fuel does a B75T oil burner use?

Fuel compatibility depends on the exact burner configuration. Confirm whether the model is designed for diesel, light fuel oil, heavy oil or another approved fuel before use.

7. Can a B75T oil burner be used with a boiler?

Yes, if the burner’s heat output, flame dimensions, fuel system and mounting arrangement are compatible with the boiler manufacturer’s requirements.

8. Can a B75T oil burner be used in an industrial furnace?

It may be suitable for a compatible furnace. The furnace designer or burner technician should check heat demand, chamber dimensions, flame shape and operating temperature before installation.

9. What is the difference between an oil burner and a gas burner?

An oil burner atomises liquid fuel and mixes it with combustion air before ignition. A gas burner mixes gaseous fuel with air for combustion. Each requires different fuel-supply and safety equipment.

10. How does an industrial oil burner work?

The burner supplies fuel and combustion air, ignites the mixture and monitors the flame. The resulting heat is transferred into the boiler, furnace or heating chamber.

11. Does a B75T oil burner need three-phase electricity?

The requested version is advertised as 380V, but the exact electrical phase and frequency must be checked on the motor nameplate and wiring diagram. Do not assume the connection from voltage alone.

12. What are the main parts of an oil burner?

Common components include the motor, combustion fan, fuel pump, fuel filter, nozzle, ignition transformer, electrodes, controller, flame detector, solenoid valve and combustion head. The exact arrangement varies by model.

13. Why does an industrial oil burner fail to ignite?

Possible causes include an interrupted fuel supply, blocked filter or nozzle, faulty ignition components, incorrect air adjustment, a failed flame detector or a safety-control lockout. A qualified technician should diagnose the fault.

14. How often should an oil burner be serviced?

Service frequency depends on operating hours, fuel quality, environment and manufacturer instructions. Maintenance commonly includes checking the nozzle, fuel filter, electrodes, fan, pump, flame detector and electrical connections.

15. How do you improve oil burner combustion efficiency?

Use the approved fuel, maintain clean filters and nozzles, ensure adequate combustion air and have a qualified technician test and adjust combustion using suitable instruments. Avoid adjusting air and fuel settings by guesswork.

16. Where can I buy an original B75T oil burner in Lagos, Nigeria?

Contact IFYTEX INDUSTRIAL EQUIPMENT at F96Up, Alaba International Market, Ojo, Lagos, Nigeria. Call or WhatsApp 09034980831 to confirm the exact model, specifications, current price and availability.

20 Related Products in the Same Category

B55T oil burner, B75T industrial oil burner, B100T oil burner, B120T oil burner, B150T oil burner, B180T oil burner, B200T oil burner, B250T oil burner, Bairan B75T burner, Bairan B55T burner, diesel oil burner, light oil burner, heavy oil burner, waste oil burner, dual-fuel gas oil burner, industrial boiler burner, automatic oil burner, two-stage oil burner, industrial furnace burner, oil burner spare parts.

SEO-Optimised Conclusion

The B75T Oil Burner 3kW 380V 2800r/min Price in Nigeria depends on the exact burner configuration, motor rating, heat output, fuel compatibility, control system, accessories and supplier warranty. The B75T is part of Bairan’s industrial oil-burner range and is intended for suitable boiler, furnace and industrial heating applications. Before buying, verify the 3kW motor rating, 380V electrical supply, 2,800r/min speed and thermal output on the manufacturer’s datasheet. For the current price, availability and product details, contact IFYTEX INDUSTRIAL EQUIPMENT, F96Up, Alaba International Market, Ojo, Lagos, Nigeria. Call or WhatsApp 09034980831 for enquiries.

30 SEO Tags

B75T oil burner, B75T burner price, B75T burner Nigeria, 3kw oil burner, 380V oil burner, 2800rpm oil burner, industrial oil burner, diesel oil burner, industrial burner Nigeria, boiler oil burner, furnace oil burner, oil burner price Nigeria, Bairan oil burner, Bairan B75T burner, Bairan burner Nigeria, IFYTEX B75T burner, IFYTEX oil burner, IFYTEX burner Nigeria, IFYTEX industrial equipment, IFYTEX burner supplier, automatic oil burner, industrial diesel burner, heavy oil burner, light oil burner, waste oil burner, two stage oil burner, boiler burner price, industrial heating burner, oil burner Lagos, original B75T burner.

Five Related Brand Tags

Riello oil burner, Baltur oil burner, Weishaupt oil burner, Ecoflam oil burner, Bairan industrial burner.

SEO Meta Description

B75T Oil Burner 3kW 380V 2800r/min Price in Nigeria. Contact IFYTEX INDUSTRIAL EQUIPMENT, a leading seller and importer of industrial oil burners in Nigeria. Best seller for industrial equipment enquiries at F96Up, Alaba International Market, Ojo, Lagos. Call or WhatsApp 09034980831 for current price, specifications and availability.

Sources and price notes: Bairan’s official catalogue includes the B75T in its light-oil burner range. bairanburner.com Nigerian marketplace listings advertise B75T products at ₦6.8 million and a separate listing at ₦16.8 million, but the specifications differ and neither confirms the exact 3kW version. Jiji Nigeria +1 The BNL75 manufacturer’s page provides examples of industrial oil-burner components and operating features, but it is a different model and should not be used as the B75T’s specification sheet. bntee.com